The E-Plex II has many unique features:
• Range of 15 to 20 greens plus/depending upon application and terrain
• Exceptional quality of cut with 9- or 11- knife reels
• Offset perimeter cut capability
• Foot operated mow switch and individual reel on/off switch
• Quick disconnect, interchangeable cutting units
• Ability to control clip rate by ground speed
• Solid state, electronic control systems
• Easy to charge with proven Lestronic II automatic battery charger
• Lift-out battery pack for extended use
• Regenerative braking system for accurate speed control
• Swing-out rear centre reel
• Optional 7-knife Tees units


Specifications:

Power
Motor: 48-volt, shunt wound DC, totally enclosed non-vented electric motor
Horsepower: 2.6kW (3.5hp) @ 2300rpm
Energy Source: Eight, 6-volt T-1 05, 217 AH golf cart batteries
Range: Up 3 hours operation on one full charge with F105 batteries

Drivetrain
Traction Drive: Electric motor directly coupled to a Cushman 15.67:1 ratio worm gear differential; foot pedal forward and reverse with infinite variable speed
Cutting Unit Drive: 0.4kw (0.5hp), 48-volt direct coupled, permanent magnet DC electric motor

Speed:
Mowing: 6.4km/h (4mph), adjustable maximum
Transport: 12km/h (7.5mph)
Reverse: 6km/h (3.8mph)

Instruments: Battery condition meter; hour meter
Controls: Industrial electric motor speed control; single foot pedal for forward/reverse control; integrated lift/lower on/off foot operated mow switch; manual rocker switch for reel lift/lower by electric linear actuators; individual rocker switch for reel on/off selection; foot operated parking brake

Tyres: 20 x 10.00-10, 2-ply
Brakes: Disc brakes to front wheels, mechanically foot actuated; park brake latch on brake pedal
Steering: 381 mm (15”) diameter steering wheel with cable to rear wheel
Seat: High-back contour with 127mm (51") fore/lift adjustment; armrest optional

Cutting Units
Type Three 559mm (22”) steerable floating heads
Cutting Unit Lift Independent lift to each unit by selector switch
Cutting Reel 9- or 11-knife, 127mm (5”) diameter

Rollers:
Fron:t Smooth or grooved, 51 mm (2”) diameter
Rear: Smooth standard, grooved optional, 51 mm (2”) diameter
Height of Cut Adjustmen:t Micro-adjusters to front rollers
Bottom Blade to Reel Adjustmen:t Opposed set screw
Height of Cut: .2.5mm to 14mm (0.10” to 0.56") or 162mm (0.078") with tournament bottom blade

Cutting Frequency:
9-knife reels: 4.6 mm at 6.4 km/h (0.18” at 4mph)
11-knife reels: 3.8 mm at 6.4 km/h (0.148” at 4mph)

Dimensions
Width of Cut: 1.57m (62”)
Overall Width with Reels: 1.9m (75”)
Overall Height: 1 .4m (55”)
Overall Length with Reels and Catchers: 2.6m (102”)
Wheelbase: 1.37m (54”)
Front Wheel Tread: 1.30m (51.6”)
Weight without Reels: 550kg (1216lb)
Weight with Reels: 663kg (1464lb)

Safety
Conforms to EEC machinery safety and noise directives

Safety
9- or 11-knife reels; smooth or grooved front rollers; grooved rear roller; rear roller brush; front and rear roll scrapers; grass catchers; Tees unit; armrests; battery set-eight 6-volt T-145, 244 AH golf cart batteries.