19-HP Kubota Diesel
Engine: Kubota D662, 3-cylinder diesel
Horsepower: (© 3,600 rpm) 19 (14.2 kW)
Displacement: 40.03 cu. in. (656 cc)
Air Cleaner: Dry type, Donaldson
Cooling: Pressurised, sealed cooling system, coolant capacity: 3 qt. (2.85 I)
Lubrication: Fully pressurised
Oil Filter: Replaceable spin-on type
Electrical System: 12V Bendix starter 4-amp alternator, key start

18-HP Vanguard Gas
Engine: Briggs & Stratton Vanguard V-Twin. 4-cycle, 2-cylinder, OHV
Horsepower: (@3.600rpm) 18 (13.4 kW)
Displacement: 34.8 cu. in. (570 cc)
Air Cleaner: Replaceable dual element
Cooling: Air-cooled
Lubrication: Fully pressurised
Oil Filter: Replaceable spin-on type
Electrical System: I2V Bendix starter, 16-amp alternator, key start

Vehicle
Tyres: 20 x 10 x 10, 2-ply pneumatic, tubeless
Brakes: Hydrostatic
Parking Brake: Disc type, hand operated
Mowing Speed: 0-3.7 mph (0-6 km/h)
Transport Speed: 0-7.6 mph (0-12.2 km/h)
Reverse Speed: 0-3.5 mph (0-5.66 km/h)
Transmission: Hydrostatic
Traction Drive: Hydraulic torque motor on each drive wheel, integral full-differential action
Reel Drive: Gear-type hydraulic motor, dual direction on each reel
Reel Lift: Hydraulic double-action cylinders
Steering: Power rear wheel, round tilt steering wheel
Hydraulic: System 4 gal. (19 l) reservoir, low oil level monitor, 20 micron full-flow filtration

Mower
Number and Size: (3) 22 in. (.56 m) reels, 5 in. (127 mm) diameter
Number of Blades: 11
Blade Material: Hardened, high-manganese carbon steel
Cutting Frequency: .049 in./mph (.75 mph/kmh)
Overall Cutting Width: 62 in. (1.57m)
Rollers: Solid or grooved
Height-of-Cut Range: 3/64 in. (1.19 mm) to 7/16 in. (11 mm) depending on turf conditions and bedknife installed

Bedknifes
High Profile: 5/32 in. (3.96 mm) cutting height (optional)
Low Profile: 7.64 in. (2.77 mm) cutting height
Tournament: 5/64 in. (1.98 mm) cutting height (optional)
Super Tournament: 3/64 in. (1.19 mm) cutting height (optional)
Bedknife Ajustment: Opposed screw type
Bedknife Material: Hardened, high-manganese carbon steel
Grass Catcher: Polyethylene

Dimensions
Weight. Traction Unit Only (Wet):
Diesel (2WD) 1.009 lbs. (457.7 kg)
Diesel (3WD) 1.039 lbs. (471.3 kg)
Gas (2WD) 895 lbs. (406 kg)
Gas (3WD) 925 lbs. (419.6 kg)

Weight, Traction Unit With Cutting Units (Wet):
Diesel (2WD) 1.269 lbs. (575 kg)
Diesel (3WD) 1,299 lbs. (588.6 kg)
Gas (2WD) 1,169 lbs. (530 kg)
Gas (3WD) 1,199 lbs. (543.6 kg)

Length:
Catchers On 99.5 in. (2.53 m)
Catchers Off 87.5 in. (2.22 m)

Height:
To Top of Steering Wheel 47.5 in. (1.2 m)
Wheel Base 52.8 in. (l.34 m)

Width:
Across Wheels 56.5 in. (1.44 m)
Tread 47in. (l.2 m)
With Mowers in Mowing Position 70 in. (1 .78 m)
With Mowers in Transport Position 68 in. (1.73 m)

Accessories
Grooved disc roller, smooth roller, grooved machined steel roller, grooved machined aluminium roller, 22-inch front roller fine-bristle brush, 22-inch machined grooved rear roller, 22-in. segmented roller, front and rear roller brushes, grass catchers, 7-blade reels, 11-blade greens reels, high cut roller kit to extend height of cut range above 3/4 inch (19 mm), Turf Groomer with .250-inch (6.35 mm) blade spacing, Turf Groomer with .500-inch (12.7 mm) blade spacing, OuickRoll, vertical mowers, spiker attachment, traction tyre conversion kit, on-board backlapping kit.