Engine
Model: Honda GX-120 K1 QX 4-cycle, OHV, air-cooled
Horsepower: 4.0 (2.98 kW)
Maximum Torque (0 2,500 rpm:) 5.4 ft.-lbs. (7.5 Nm)
Carburetor: Horizontal-type, butterfly valve
Fuel Capacity: .66 gal. (2.5 l)
Starter: Recoil rope
Noise Level/Operator's Ear: 79 dBa (while mowing)

Traction & Differential
Traction Clutch: Automotive disc type
Traction Reduction Ratio: 24:1
Traction and Reel Drives: Chain drive in oil-tight housing
Transport Tyres: (2) pneumatic 11 x 4
Differential: Full automotive type, self-contained
Rear Drive Rollers: (2) machined aluminum alloy, 7.75 in. O.D. x 9.80 in. (197 mm x 249 mm)
Travel Speed (@ 3,000 rpm): 2.9 mph (4.7 km/h)

Mower
Type: Reel
Cutting Frequency: .205 in. (5.2 mm)
Reel: Clutch Separate cog type

Cutting Width:
PGM I9 19 in. (483mm)
PGM 22 22 in. (559 mm)
Height of Cut: 3/64 in. to 7/16 in. (1.19mm to 11 mm), depending on turf conditions and bedknife installed
Reel Diameter: 5 in. (127 mm)
Reel Shaft Diameter: 15/16 in. (23.8 mm)
Number of Blades: 11
Blade Material: Hardened high-manganese, high-carbon steel
Reel Bearing: Spring-loaded Timken tapered roller
Reel Reduction Ratio: 2.25:1
Side Frame Material: Cast-aluminum alloy
Bedknives: Hardened carbon steel
High Profile: 5/32 in. (3.97 mm) cutting height
Low Profile: 7/64 in. (2.78 mm) cutting height (standard)
Tournament: 5/64 in. (1.98 mm) cutting height
Super Tournament: 3/64 in. (1.19 mm) cutting height
Grass Catchers: Polyethylene
Weight: 178 lbs. (81 kg)
All weights on green with catcher and machined-aluminum grooved roller

Accessories
Turf Groomer - Our patented turf conditioner, with unique intersecting roller and knives, lifts and cuts horizontally growing grasses for healthier turf and faster greens. Helps control grain and thatch.

Solid Front Roller - For cutting in normal grass conditions.

Grooved Front Roller - Machined aluminum or steel. Provides deeper penetration of grass to ensure desired height of cut. Helps control thatch and grain.

Soft-Touch Rotary Brush - Full-width brush gently stands grass up for a better cut.

Front Roller Fine-Bristle Brush - Helps lift runners and control grain. Adjustable to vary the pressure on turf.

Power-Driven Vertical Reel - Fits in place of rotary brush to remove surface thatch, cut runners and help control grain.

Push Brush Attachment - Helps control grain and can be used to work in topdressing.

Two-Inch Guide Wheels - For use on highly contoured greens.

Light Kit.