Specifications:
19 HP Kubota Diesel
Engine: Kubota D662, 3-cylinder
Horsepower: 19 (14.2 kW)
Displacement: 40.03 cu. in. (656 cc)
Air Cleaner: 2-stage, centrifugal, dry type, with Vacuator
valve
Cooling: Pressurised, sealed cooling system, coolant
capacity: 3 qt. (2.85 I)
Lubrication: Fully pressurised with replaceable spin-on
filter, oil capacity: 3.1 qt. (2.94 l)
Electrical System: 12 V, 08 kW starter, 40-amp alternator,
key start start
18 HP Vanguard Gas
Engine: Briggs & Stratton Vanguard V-Twin, 4-cycle
2-cylinder OHV
Horsepower: (@ 3,600rpm) 18 (13.4kW)
Displacement: 34.8 cu. in. (570 cc)
Air Cleaner: Replaceable dual element
Cooling: Air cooled
Lubrication: Fully pressurised
Oil Filter: Replaceable spin-on type
Electrical System: 12 V Bendix starter, 16-amp alternator,
key start
Vehicle:
Tyres: Front (2) 20x 10-10, 2-ply, tubeless
Tyres: Rear (1) 20 x 10-8, 2-ply, tubeless
Service Brake: Dynamic braking through hydrostatic drive
Parking Brake: Disc type on front wheels, hand operated
Mowing Speed: 0-5 mph (0-8 km/h)
Transport Speed: 0-8.5 mph (0-13.7 km/h)
Reverse Speed: 0-2.3 mph (0-3.7 km/h)
Traction Drive: Direct-coupled hydrostatic transmission
with high-torque wheel motors, "automatic”
3WD with mower switch engaged
Reel Drive: Fixed-displacement 3-section gear pump and
3 bi-directional gear motors connected in parallel,
hydraulic, variable-speed backlapping standard
Reel Lif:t Single-pedal control, single hydraulic cylinder
with automatic reel shutoff
Operator Control: Foot-operated traction pedal, foot-operated
reel lift/lower pedal, hand throttle, ignition switch;
engine glow plug switch (diesel), choke control (gas),
mower/3WD switch, parking brake, seat adjustment
Gauges/Indicators: Engine coolant temperature (diesel),
voltmeter hourmeter, engine low oil warning light, air
filter restriction (diesel)
Fuel Capacity: 6.5 gal. (25 l)
Seat: High-back ,front-to-rear adjustment standard
Steering: Hydrostatic power, rear wheel
Hydraulic System: 5.5 gal (21 l) capacity 10-micron
full-flow filtration
Mower
Reel Number and Size: 3 26 in. (.66 m) or 30 in. (.76
m) reels, 7 in. (178 mm) diameter
Number of Blades: 5, 7or 10
Blade Material: Hardened, high-manganese carbon steel
Cutting Frequency 5-blade: .210 in/mph (3.33 mm/km/h)
Cutting Frequency 7-blade: .150 in/mph (2.38 mm/km/h)
Cutting Frequency 10-blade: .106 in./mph (1.68mm/km/h)
Overall Cutting Width: 72 in. (l.83m) or 84in. (2.13m)
Rollers Front (Optional): 3 in. (76.2 mm) diameter,
solid or grooved
Rear (Standard): 2.5 in. (63.5 mm) diameter solid
Height of Cut Range: 3/8in. (9.5 mm) to2-l/4in. (57.2
mm) infinitely adjustable
Height of Cut Adjustment: Fine, wrench adjustment on
front and rear rollers
Suspension: Fixed or floating heads, changeable
Grass Catchers (Optional): Polyethylene
Dimensions
Weight, Vehicle and Cutting Units (Wet):
1 900D:
With 3 26-in. (.66 in), 10-blade reels 1,594 lbs. (723
kg)
With 3 30-in. (.76m). l0-blade reels l,6421bs. (745kg)
1 800G:
With 3 26in. (.66mm), 10-blade reels l,4801bs. (671
kg)
With 3 3Oin. (.76mm), 10-blade reels l,5281bs. (693kg)
Length:
With Reels 96 in. (2.44m)
Height:
To Top of Steering Wheel 51.5in.(1.31m)
Wheelbase 55.3 in. (1.41 m)
Width:
Across Front Wheels 64.5 in. (1.64 m)
With Mowers in Mowing Position 78.5 in. (1.99 m) or
90.5 in. (2.30 m)
With Mowers in Transport Position 76.5 in. (1.94 m)
or 88.5 in. (2.25 m)
|
