| Specifications:
Power
Engine: Perkins 4 cylinder, 4-stroke, Liquid cooled
Diesel
Horsepower: 44.7kW (60hp) @ 2800rpm
Displacement: 2200cc
Air Cleaner: Centrifugal flow, Dry type
Starting: System Key switch glow plug for cold weather
starting
Drivetrain
Transmission: Hydrostatic
Type: Servo controlled pump directly mounted to engine
Speed: Control Foot controlled speed
Drive (Mowing): Full time 4-wheel hydrostatic drive
Drive (Transporting): 2-wheel drive for transport
Oil Reservoir: 18.8 litres (4.1 gallons)
Fuel Capacity: 45.4 litres (12 gallons)
Speed (Maximum): 11 km/h (7mph)* 23 km/h (14mph)** 6
km/h (4mph)***
Steering: Power, rear wheel steering
Brakes: Hydrostatic braking through traction drive with
hydraulic wet disc brakes for parking
Tyres (Front): 24 x 13-12, 4 ply tubeless turf, 20 psi
Tyres (Rear): 20 x 10-8, 6 ply tubeless turf, 20 psi
Cutting Decks
Construction: Heavy duty welded 11 gauge steel with
7 gauge skirts
Deck Drive: Single L-L poly section belt
Spindles: 40mm diameter, double sealed, greasable bearings
Blades (Centre Deck): Three 530mm (21"), 6mm (1/4")
thick, heat treated blades
Blades (9' 8" Wing decks): Three 460mm (18"),
6mm (1/4") thick, heat treated blades
Blades (10' 7" Wing decks): Two 530mm (21"),
6mm (1/4") thick, heat treated blades
Weight Transfer: 82kg from deck to tractor
Cutter deck lift: Individual control for each deck.
Wing decks raise to vertical position. Front raises
to 6" (150mm) ground clearance at lowest point
Cutter width: 9' 8" model; 2.95m. 10' 7" model;
3.23m
Cutting performance: 9' 8" model; 2.8 ha/h (6.75
acres @ 5mph)
Cutting performance: 10' 7 model; 3 ha/h @ 8km/h (7.4
acres @ 5mph)
* Cutting ** Transport *** Reverse
|
