The Commander's
superb features:
• 6-knife Magna 250 units for mowing long, lush
grass
• 8 or 11-knife Sport 200 units for finer turf
• Hydrostatic transmission with selectable 2 or
4WD
• Transport speed up to 25kph (15mph)
• Direct drive hydraulic motors to cutting units
• Infinitely variable forward and reverse speeds
by single foot pedal
• Hydraulic lift to cutting units with individual
control of wing units
• Wing units articulate downwards for 25º
slope mowing
• Variable reel speed and weight transfer controls
• Visual display and audible warning for engine
and operating functions
• Hydrostatic power steering and tilt adjustable
steering wheel
|
ENGINE
Model: Kubota V2203B, 4-cylinder, water-cooled diesel
Horsepower: 38kW (51hp)
Displacement: 2197cc
Starting: 12 volt electric
Fuel Capacity: 60 litres (13.2 gallons)
POWER UNIT
Traction Drive: Heavy-duty variable displacement, reversible
piston pump with servo control and heavy-duty, low speed
high torque wheel motors on all four wheels; selectable
2 or 4WD; parallel series 4WD drive system
Cutting Unit Drive: Hydraulic drive with fixed displacement
gear pump and direct drive motors on each cutting unit
system. (Drive disengages when units are lifted) Parallel
series
Speed
Mowing: 12km/h (7.5mph) 4WD
Transport :25km/h (15mph)
Reverse: 7km/h (4.5mph)
Hydraulic Tank Capacity: 52 litres (11.4 gallons)
Instruments: Fuel level; engine temperature gauge; hour
meter; battery charge lamp; engine oil pressure lamp;
pre-heater lamp; engine overheat temperature lamp; 3-safety
interlock indicator lamps; cutting circuit pressure
gauge
Controls
Ignition switch; hand throttle; hydraulic cutting unit
and lift/lower control levers; backup control lever;
variable reel speed; variable weight transfer; forward,
neutral and reverse speed foot pedal; parking brake
Tyres - Front: 26 x 12.0-12, 6 ply turf tread
Tyres - Rear: 23 x 10.5-12, 6 ply turf tread
Brakes - Service: Hydrostatic
Brakes - Parking: Internal wet disc system; hand lever
control
Steering: Hydrostatic power steering with tilt wheel
Seat: Adjustable, high back suspension with arm rests
CUTTING UNITS
Type: Five 760mm (30") reels with equal ratio lift
arms
Weight Transfer: Units balanced with hydraulic weight
transfer
Cutting Unit Lift: Individual lift to wing units and
centre three units together
Cutting Reel
Magna 250: 6 knife, 254mm (10") diameter, fixed
head
Sport 200: 8 or 11-knife, 197mm (7 ¾") diameter,
floating head
Rollers
Front: Sport 200; 76mm (3") diameter grooved with
steel scraper
Rear: 76mm (3") diameter smooth roller with wire
scraper
Unit Adjustments: By hand for cylinder to bottom blade,
spanner for HOC
Height of Cut
Magna 250: 13mm to 51mm (1/2" to 2")
Sport 200 :13mm to 35mm (1/2" to 1 3/8")
Thin blade: 7mm to 3mm (9/32" to 15/32")
Cutting Frequency
Magna 250: 6 knife, 24 cuts/metre at 12km/h (22 cuts/yard
at 7.5mph)
Sport 200: 8 knife, 32 cuts/metre at 12km/h (29 cuts/yard
at 7.5mph)
Sport 200: 11 knife, 44 cuts/metre at 12km/h (40 cuts/yard
at 7.5mph)
Cutting Performance: 3.2 hectares/h at 12.5km/h (8 acres
at 7.5mph)
DIMENSIONS
Width of Cut: 3.5m (138")
Transport Width: 2m (79")
Overall Height: 1.45m (57")
Overall Length: 3.1m (123")
Uncut Turning Circle: 1.3m (51")
Weight with Cab/Without Cab: 2205kg (4861lb)/2015kg
(4442lb)
Ground Pressure: 1.05kg/cm2 (14 psi)
SAFETY
Conforms to EEC machinery safety and noise directives
OPTIONAL EQUIPMENT
Verticut units; all weather cab; 6-post ROPS; rotating
beacons; high HOC kit for floating head units; thin
bottom blade |
