The new Highway 2130 offers superb features maximum performance:
• Easy accessibility of hydraulics and power unit
• Electrical indicator for hydraulic oil filter change
• Sturdy chassis constructed of heavy-duty plate steel
• Direct hydraulic drive to cutting units
• Servo-controlled hydrostatic transmission
• Fully adjustable, high-back suspension seat
• Power steering with tilt steering wheel
• Optional ROPS cab or 2-post folding ROPS frame
• Individual cutting units lift and lower lever control
• Hydrostatic fail-safe wet disc brakes for parking
• Differential lock for better traction on slopes
• Variable weight transfer control
• Sports 200, fixed and floating head cutting units
• 2WD or 4WD configuration available

Specifications : ENGINE
Model: Kubota V1305 B, 4-cylinder, liquid-cooled, diesel
Horsepower: 25kw (33hp) @ 3000 rpm
Displacement: 1335cc
Starting: 12 volt electric
Fuel Capacity: 45 litres (10 gallons)

Speed
Mowing: 12km/h (7.5mph)
Transport: 25km/h (15mph)
Reverse: 6.4km/h (4mph)
Hydraulic Tank Capacity: 35 litres (7.7 gallons)
Instruments: Hour meter, fuel level gauge, water temperature gauge

POWER UNIT
Traction Drive: Direct coupled, servo controlled pump supplying front wheel drive motors with solenoid operated differential lock.

Cutting Unit Drive: Forward, neutral and reverse valve with hand lever control, drive by fixed displacement motors directly coupled to reels, hand control lever for variable reel speed

Controls
Ignition switch; hand throttle, individual cutting hydraulic lift controls, backlap control lever, variable reel speed, variable weight transfer. Forward, neutral and reverse speed foot pedal, parking brake

Tyres - Front: 23 x 10.5-12, 6 ply Multi Trac CS tread pattern
Tyres - Rear 2WD: 18.5 x 8.5-8, Sport Trax
Tyres - Rear 4WD: 18.5 x 8.5-8, Multi Trac CS tread pattern

Brakes - Service: Hydrostatic
Brakes - Parking: Internal wet disc system; hand lever control
Steering: Hydrostatic power steering with tilt wheel
Seat: Adjustable, high back suspension with armrests

CUTTING UNITS
Type: Three 76cm (30") reels with equal ratio lift arms
Weight Transfer: Units balanced with hydraulic weight transfer
Cutting Unit: Lift Individual hydraulic lift/lower to units

Cutting Reel
Sport 200: 4- or 6 knife, 197mm (7 ¾") diameter, fixed head
Sport 200: 8- or 11-knife, 197mm (7 ¾") diameter, floating head

Rollers
Front: Full width, 76mm (3") diameter, smooth roll (floating head)
Rear: Full width, 76mm (3") diameter, smooth roll
Reel Adjustment: Tool or hand wheel through screw system

Height of Cut
Fixed Head: 13mm to 80mm (1/2" to 3 3/16")
Floating Head, Standard Blade: 13mm to 35mm (1/2" to 1 3/8")
Thin blade: 7mm to 30mm (3/32" to 1 5/32")

Cutting Frequency
Sport 200: 4 knife, 24 cuts/metre at 12km/h (7.5mph)
Sport 200: 6 knife, 35 cuts/metre at 12km/h (7.5mph)
Sport 200: 8 knife, 47 cuts/metre at 12km/h ( 7.5mph)
Sport 200: 11 knife, 65 cuts/metre at 12km/h (7.5mph)

Cutting Performance: 2.3 hectares/h at 12.5km/h (5.7acres at 7.5mph)