Productive
• Five cutting units gives working width of 3.43M (135")
• Outer units can be raised to give transport width of 2.50m (98")
• Height of cut ranges from 9.5mm to 47mm (3/8" to 1 7/8") for a fine finish
• Cutting performance of 2.5 hectares/hr at 10 km/hr (5 acres at 5 mph)

Designed to Perform
• Fully mounted five unit hydraulic gang mower designed for undulating golf course fairways
• Fitted with Sportcutter 6-knife, 197mm (7 3/4") diameter, floating head cutting units
• Hydraulic motor via gear reduction and final drive to cutting reel
• Minimum tractor requirement of 35 horsepower
• Optional fully floating, hydraulic drive verticut units

Easy to Operate
• Single hydraulic control lever for forward, neutral and reverse drive to cutting reels
• The machine is raised or lowered into work by the tractor's 3 point linkage and the wing units by the tractor's external hydraulic system
• Quick attachment/detachment to tractor

Serviceable
• Backlapping of cutting reels through hydraulic control lever

Built to Last
• Simple, rugged construction of welded and bolted steel box section
• Knifes and bottom blades are of the highest quality and hardness
• Heavy-duty hydraulic pump and motors


Specifications:

Standard Features
Welded and bolted hollow box section frame; cutting reel drive control lever for forward and reverse for backlapping

Hydraulic System
Forward, neutral and reverse drive to cutting units by single stack hydraulic valve and independent hydraulic lift by tractor hydraulics.
Pto drive from tractor to gearbox mounted on frame, through hydraulic pump, via hydraulic valve to cutting unit hydraulic motors

Hydraulic Capacity
40 litres (9 gallons)

Controls
Single hand lever control mounted machine but within easy reach from the tractor seat. Machine and outer units raised/lowered by tractor hydraulics

Cutting Units
Type: 6-knife Sportcutter floating head units
Construction: Heavy-duty, pressed steel bolted construction
Cutting Unit Lift: Outer units by single acting ram
Suspension: Floating head
Cutting Reel: All-welded, 6 knife 197mm (7 3/4") diameter
Height of Cut Adjustment: Front and rear roller adjust in parallel by screw system to rear roller
Reel to Bottom Blade Adjustment: Adjustable by spanner
Bottom Blade and Bottom Block: Replaceable bottom blade mounted onto a steel fabricated bottom block
Front Roller: 60mm (2 3/8") smooth roller
Rear Roller: 60mm (2 3/8") smooth roller
Cutting Ratio: 58 cuts/metre (54 cuts/yard) at 8 km/hr (5mph)

Cutting Performance
Rate: 2.5 hectares/hr at 10 km/hr (5 acres at 5 mph)
Height of Cut: 9.5mm to 47mm (3/8" to 1 7/8) 13mm to 65mm (1/2" to 2 9/16") with floating head locked and front in raised position

Tractor Requirement
Standard 40mm (1 3/8") diameter, 6-spline 540rpm pto shaft, cat. 1or 2 three point linkage, 35hp minimum

Dimensions
Cutting Width: 3.43m (135")
Transport Width: 2.50m (98")
Overall Height (free standing): 0.98m (39")
Overall Length (freestanding): 1.11m (44")
Weight: 600kg (1323lb)

Optional Equipment
Verticut unit grooved front roller