Easy to Operate
• Cab mounted push/pull cable controls for cutting units reel drive and lift
• Quick attachment/detachment to tractor
• Variable weight transfer control
• Cutting unit lift with automatic reel shutoff and safety interlock restart by push button
• Adjustable drawbar height
• Height of cut and reel to bottom blade adjustment with tools and hand wheel adjusters

Designed to Perform
• Magna 250 6- knife, 254mm (10") diameter fixed head cutting units
• Sport 200 8 or 11- knife, 197mm (7 3/4") diameter floating head units
• Direct hydraulic drive to cutting units
• Large 10.5 - 16 ribbed tread radial ply tyres
• Full road lighting kit as standard
• Fitted with suspension and over-run brakes

Productive
• TG4650 with seven cutting units gives working width of 4.69m (183")
• Transport width of 2.17m (85 ½") for TG3400 and 2.28m (111") for TG4650
• Height of cut ranges from 9.5mm to 47mm (3/8" to 1 7/8") for a fine finish
• Lift control to centre units and independent control over outer units enables working width to be varied
• Cutting performance of 3.5 hectares/hr for seven unit model and 2.5 hectares/hr for five unit model

Serviceable
• Backlapping of cutting reels through control lever
• Ease of accessibility to hydraulics
• Diagnosis of hydraulics through test ports

Built to Last
• Rugged chassis constructed of heavy-duty tubular and plate steel
• Knifes and bottom blades are of the highest quality and hardness
• Heavy-duty hydraulic pumps


Specifications:

Standard Features
Heavy-duty tubular and formed welded steel main frame; remote hand lever controls through pull-push cables for tractor cab mounting; reel lift with automatic reel shutoff and safety interlock restart by push button control; reel drive control lever for forward and reverse for backlapping; variable weight transfer control; adjustable drawbar height; full road lighting kit

Axle
Solid axle beam with trailing arm suspension

Wheels and tyres
10 x 5-16 ribbed tread radial ply tyres

Brakes
250mm (9 7/8") diameter x 40mm (19 9/16") wide overrun drum brakes with auto reverse mechanism and handbrake

Drawbar
Square section steel tube with interchangeable towing eyes to suit tractor pick-up hitch; swinging drawbar; Landrover jaw hitch etc; drawbar provided with drop-down jockey wheel

Hydraulic System
Gear pumps mounted on speed-up splitter gearbox driven by universal drive shaft from tractor pto. Mechanically operated motor drive valves simultaneously activate forward/neutral/reverse of cutting unit motors in separate circuits to give 69 bar (1000 psi) for each cutting cylinder. Diverter valves mechanically operate cutting unit drive disengagement when lifting. Diverters re-engage drive by pilot flow activated by push-switch at handlevers in tractor cab. Spool lift valve provides lift of centre units and individual lift to each outer unit, all units have variable weight transfer by adjustable valve

Hydraulics
Capacity: 150 litres (32.8 gallons), 25 micron absolute filter with indicator. Diagnostic hydraulic test ports on each pump

Lighting
Rear tail/stop light, rear and side reflectors, direction indicator and side marker lamps

Controls
4 handlever controls for mounting in tractor cab; push/pull cables operate hydraulic control valves on machine; single push button to re-engage reel drive when units are lowered; single control lever for forward/neutral/reverse reel drive; control levers for lift/lower of centre units and outer units

Cutting Units
Type: Seven or five 6-knife Magna 250 fixed head units or 8 and 11-knife Sport 200 floating head units
Construction: Heavy-duty, welded pressed steel
Cutting Unit Lift: Centre units by single acting rams - with float. Wing units by double acting rams - with float
Suspension: Fixed or floating head
Cutting Reel: All-welded, 6 knife 254mm (10") diameter or 8 and 11 knife 197mm (7 3/4") diameter
Height of Cut Adjustment: Micro handwheel adjustment
Reel to Bottom Blade: Adjustment Micro handwheel adjustment
Bottom Blade and Bottom Block: Replaceable bottom blade mounted onto a steel fabricated bottom block
Front Roller: Sport 200; 76mm (3") smooth roller
Rear Roller: Magna 250 and Sport 200; 76mm (3") grooved roller
Cutting Ratio (at 540 rpm pto speed): 6- knife; 39 cuts/metre (42.5 cuts/yard) at 8 km/hr (5mph)
Cutting Ratio (at 540 rpm pto speed):8- knife; 52 cuts/metre (57 cuts/yard) at 8 km/hr (5mph)
Cutting Ratio (at 540 rpm pto speed):11- knife; 72 cuts/metre (79 cuts/yard) at 8 km/hr (5mph)

Cutting Performance
Rate: TG4650; 3.5 hectares/hr at 10 km/hr (7 acres/hr at 5 mph)
Rate: TG3400; 2.5 hectares/hr at 10 km/hr (5 acres/hr at 5 mph)
Height of Cut Magna 250; 13mm to 51mm (½" to 2") Sport 200; 13mm to 35mm (½"" to 1 3/8") 13mm to 101 (½"" to 4") in fixed position with front roll removed. 7mm to 30mm (9/32" to 1 3/16") with optional thin bottom blade

Tractor Requirement
Standard 40mm (1 3/8") diameter, 6-spline 540rpm pto shaft, 60hp minimum

Dimensions
Cutting Width: TG4650; 4.69m (185") TG3400; 3.42m (135")
Transport Width: TG4650; 2.28m (111") TG3400; 2.17m (85 ½")
Overall Height: 1.5m (59")
Overall Length: 3.37m (130")
Weight: TG4650; 1705kg (3758lb) TG3400; 1320kg (2909lb)

Safety
Conforms to EEC machinery safety directives

Optional Equipment
Thin bottom blade for Sport 200 units