Ransomes Parkway 2250 Plus
The new Parkway 2250 Plus has more plus features for greater power and productivity
The Parkway 2250 Plus triple reel mower is built tough to tackle the toughest jobs. A 2.14 metre working width and cutting speeds up to 12km/h (7.5mph) means a high-work-rate up to5.7 acres per hour. The 38hp Kubota diesel engine has plenty of power and a rugged hydraulic system to keep you on top of the job. With 4-wheel drive in work the heavy duty cutting units delivers the right finish. It's the number one machine for all round cutting capacity on parks, roadside verges and amenity areas.

The new Parkway 2250 Plus incorporates outstanding features:
• Easy accessibility to hydraulics and power unit
• Individual cutting reel lift and lower controls levers
• Direct hydraulic drive to cutting units
• 4-wheel drive for mowing and 2-wheel drive for transport
• Single foot pedal hydrostatic speed control
• Power steering with tilt steering wheel
• Rugged chassis constructed of plate steel
• Fully adjustable, high-back suspension seat
• Electric indicator for hydraulic oil filter change
• Optional ROPS cab 2-post folding ROPS frame
• Hydraulic fail-safe disc brakes for parking
• Variable weight transfer control
• Magna 250 fixed or Sport 200 floating head units

 

ENGINE
Model Kubota V1505, 4-cylinder, liquid-cooled, diesel
Horsepower 28kw (38hp) @ 3000 rpm
Displacement 1498cc
Starting 12 volt electric
Fuel Capacity 45 litres (10 gallons)

POWER UNIT
Traction Drive: Direct-coupled, servo-controlled variable displacement pump, parallel series drive system to front and rear wheels. 4-wheel drive mowing, 2-wheel drive in transport

Cutting Unit Drive: Forward, neutral and reverse valve with hand lever control, drive by fixed displacement motors directly coupled to reels, hand control lever for variable reel speed

Speed
Mowing: 12km/h (7.5mph)
Transport: 25km/h (15mph)
Reverse: 6.4km/h (4mph)
Hydraulic Tank Capacity: 35 litres (7.7 gallons)
Instruments: Hour meter, fuel level gauge, water temperature gauge

Controls
Ignition switch, hand throttle, individual cutting unit hydraulic lift controls, backlap control lever, variable reel speed, variable weight transfer. Forward, neutral and reverse speed foot pedal and parking brake
Tyres - Front: 26 x 12-12, 6 ply Multi Trac C12
Tyres - Rear: 20 x 10.00-8 Sport Trax

Brakes - Service: Hydrostatic
Brakes - Parking: Internal wet disc system; hand lever control
Steering: Hydrostatic power steering with tilt wheel
Seat: Adjustable, high back suspension with armrests

CUTTING UNITS
Type: Three 76cm (30") reels with equal ratio lift arms
Weight Transfer: Units balanced with hydraulic weight transfer
Cutting Unit: Lift Individual hydraulic lift/lower to units

Cutting Reel
Magna 250: 6 knife, 254mm (10") diameter, fixed head
Sport 200: 8 knife, 197mm (7 ¾") diameter, floating head
Sport 200: 11-knife, 197mm (7 ¾") diameter, floating head

Rollers
Front - Sport 200: Full width, 76mm (3") diameter, grooved roll (floating head)
Rear - Magna 250 & Sport 200: Full width, 76mm (3") diameter, smooth roll
Reel Adjustment: Tool or hand wheel through screw system

Height of Cut
Magna 250: 13mm to 51mm (1/2" to 2")
Sport 200 (floating): Standard blade, 13mm to 35mm (1/2" to 1 3/8")
Thin blade: 7mm to 30mm (9/32" to 1 5/32")

Cutting Frequency
Magna 250: 6-knife, 34 cuts/metre at 12km/h (7.5mph)
Sport 200: 8- knife, 45 cuts/metre at 12km/h (7.5mph)
Sport 200: 11-knife, 62 cuts/metre at 12km/h (7.5mph)

Cutting Performance: 2.3 hectares/h at 12km/h (5.7acres at 7.5mph)

DIMENSIONS
Width of Cut: 2.14m (84 ½") maximum
Overall Width: 1.60m (63")
Overall Height: 1.58m (62")
Overall Length: 2.68m (105")
Weight (wet): 1360kg (2995 lb)
Ground Pressure: 1 kg/cm2 (14 psi)

SAFETY
Conforms to EEC machinery safety and noise directives

OPTIONAL EQUIPMENT
ROPS frame, all weather ROPS cab, road lighting kit, thin blade, flashing beacon. Verticut unit

Specifications subject to change without notice

Return to Ransomes Mowers >

Fairways (GM) Ltd.
Inchinnan Office - West Yonderton, Walkinshaw Rd , Inchinnan, Renfrew, Scotland PA4 9LP | Tel: 0141 814 3355 | Fax: 0141 814 3361
Kinross Office - Bridgend Industrial Estate, Clashburn Road, Kinross, Scotland KY13 8GB | Tel: 01577 865586 | Fax: 01577 866777
Email: info@fairwaysgm.co.uk

SEO Nexussearch