Ryan Mataway Overseeder/Dethatcher
The Ryan Mataway Overseeder/Dethatcher is the most versatile, refined product of its kind on the market today. It gives turf care professionals the ability to dethatch or overseed, or to do both at one time. Depending on your requirements, you can get the Mataway Vertical Slicer/Dethatcher with or without the overseeder. Heavy-duty snap-out reels in the slicer/dethatcher let you easily select the type of blade and spacing required. The overseeder can be adjusted to provide the proper flow for all types of common turf seed including buffalo grass, and the two-inch spacing makes it possible to overseed with one pass. Seed flow stops automatically when the reel is raised to cross cartpaths or walkways. Precise depth adjustment ensures maximum germination. The overseeder can be easily removed by taking out four pins.

Features of the Ryan Mataway Overseeder/Dethatcher:
• Highly productive turf machine that dethatches and overseeds in one pass
• Seeding/slicing width: 48.3cm (19")
• 8kW (11hp) 398cc petrol engine
• Hopper capacity: 0.02m³ (0.71 cu feet)
• Overseeder adjustable for all types of grass seed
• Precise depth adjustment that ensures maximum penetration

Specifications:

Power
Engine 4-cycle, Kohler; cast-iron bore; recoil starter; dual-element air cleaner
Horsepower (@3,600 rpm) 11 (8 kW)
Displacement 24.3 cu. in. (398 cc)
Oil Capacity 2 qt. (1.9 I)

Unit
Clutch Spring-loaded belt tightener
Primary Drive 4L-section V-belt to front wheels by gear box and sealed roller chain; triple 3V-section V-belts engine to reel
Lubrication Oil splash in gear case, pressure grease fitting elsewhere
Cutting Depth Adjustable for any desired depth up to I .5 in. (38 mm) into ground
Seeding/Slicing Width 19 in. (483 mm)

Tyres:
Rear (2) I 0.25 x 4.10-4, 2-ply pneumatic, sawtooth tread
Front (2) 10.4 x 4.10-4, 2-ply pneumatic, knob tread

Optional Vertical Slicer/Dethatcher Reels
Flail Blade Type 1/8 in. (3 mm) at 1 in. (25 mm) spacing
Fixed Blade Type 1/32 in. (1 mm) at 1/2 in. (13 mm) spacing; 1/32 in. (1 mm) at 1 in. (25 mm) spacing; 1/16 in. (2mm) at 1 in. (25 mm) spacing; 1/16 in. (2mm) at 1-1/2 in. (38 mm) spacing

Dimensions
Overall Size 35.5 in. W x 54 in. L x 43 in. H (0.9 m x 1.4 m x 1.1 m)
Weight 304 lbs. (138 kg) with reels

Mataway Overseeder
SEE MATAWAY VERTICAL SLICER/DETHATCHER FOR POWER AND UNIT SPECIFICATIONS

Hopper
Capacity 0.83 cu. ft (0.02 cu m)
Configuration Rectangular top with side tapering down to feed rotor bar
Size 8.5 in. W x 8.5 in L x 13 in H (216 mmx 470 mmx 330 mm)
Seed Density Fully adjustable for all types of common grass seed

Rotor Bar and Metering System
Metering System Stainless steel plates with triangular-shaped holes sliding over each other developing a variable opening
Rotor Bar Neoprene rubber
Seed Flow Control Rotor bar stop and gate shutoff
Rotor Bar Drive Direct drive powered from front-wheel drive unit
Operation:
Rotor Bar Engages in lowered reel position only
Seed Gate Automatically shuts off when unit is raised
Maintenance Rotor bar and metering device easily removed for servicing

Lower Seed Delivery System
Seed Tubes Clear plastic
Seed Outlets 10 at 2 in (51 mm) spacing
Discs 10 high-carbon, heat-treated disc blades with scrapers
Detachable Remove 4 pins to remove disc assembly from Mataway
Slicing Reel Hardened 1 in. (25 mm) hex shaft
Fixed Blades (10) 8-pt. high carbon, heat treated; uniquely designed for slicing and longer wear life; spaced 2 in. (51 mm) centers

Dimensions
Overall Size 35.Sin W x 54 in. L x 43 in. H (0.9 m x 1.4 x 1.1 m)
Weight with Hopper/Reels 462 lbs (210 kg)

Specifications subject to change without notice

Return to Ryan Turf Care >

Fairways (GM) Ltd.
Inchinnan Office - West Yonderton, Walkinshaw Rd , Inchinnan, Renfrew, Scotland PA4 9LP | Tel: 0141 814 3355 | Fax: 0141 814 3361
Kinross Office - Bridgend Industrial Estate, Clashburn Road, Kinross, Scotland KY13 8GB | Tel: 01577 865586 | Fax: 01577 866777
Email: info@fairwaysgm.co.uk

SEO Nexussearch